Product ID:EA 960F PART B
MSDS Date:09/29/1989
FSC:8040
NIIN:01-208-6003
Kit Part:Y
MSDS Number: BJYCS

DEXTER ADHESIVES AND STRUCTURAL MATERIALS

2850 WILLOW PASS ROAD
PITTSBURG, CA 94565
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 415-687-4201

Cage: 33564

DEXTER CORPORATION ADHESIVE & COATING SYSTEMS

312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

EPOXY RESIN SYSTEM

SILICA

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <05%

OSHA PEL 20 MPPCF

ACGIH TLV: 0.1 MG/M3

TALC

CAS: 14807-96-6

RTECS: VV7720000

Fraction By Weight: <35%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

DIETHYLENE TRIAMINE

CAS: 111-40-0

RTECS: IE1225000

Fraction By Weight: <10%

OSHA PEL 1 PPM

ACGIH TLV: S, 1 PPM; 9192

PHENOL (SARA 313)

CAS: 108-95-2

RTECS: SJ3325000

Fraction By Weight: <05%

OSHA PEL 5 PPM

ACGIH TLV: 5 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <05%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

VOC <10 G/L ESTIMATE

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:MATERIAL IS CORROSIVE TO SKIN. MAY
CAUSE CHEMICAL BURNS TO EYES AND SKIN. REPEAT CONTACT MAY CAUSE
SENSITIZATION. VAPORS IRRITATING AND MAY CAUSE CHEST DISCOMFORT.
Effects of Overexposure:POSSIBLE BURNS TO EYES AND SKIN; IRRITATION AND
POSSIBLE SENSITIZATION TO SKIN. VAPORS IRRITATING AND MAY CAUSE
BRONCHITIS SYMPTOMS.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITATION PERSISTS, SEE PHYSICIAN.

Flash Point Method:TOC
Flash Point:>300F,>149C
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. STORE AT ROOM TEMPERATURE (77 DEG. F) FOR 12 MONTHS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Work Hygienic Practices:WASH AFTER HANDLING.
Supplemental Safety and Health
FAILURE TO OBSERVE CAUTION MAY RESULT IN EXCESSIVE HEAT BUILD-UP WITH
THE RELEASE OF TOXIC GASES. CONTAINS DIETHYLENETRIAMINE. VAPORS MAY
BE IRRITATING. KEEP CONTAINER CLOSED. USE ONLY WITH GOOD VENTI
LATION. DO NOT CUT OR WELD CONTAINER. DO NOT USE UNTIL THE MSDS HAS
BEEN READ AND UNDERSTOOD.

Boiling Pt:B.P. Text:400
Vapor Pres:<0.01MM
Vapor Density:4.0
Spec Gravity:1
Evaporation Rate & Reference:NIL
Solubility in Water:PARTIAL
Appearance and Odor:OFF-WHITE PASTE

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:MIXING RESIN/CURING AGENT IN BATCHES
GREATER THAN 1 LB. DO NOT HEAT MIXED ADHESIVE UNLESS CURING
SURFACES TO BE BONDED.

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.